Views: 98 Author: Site Editor Publish Time: 2025-10-28 Origin: Site
Grouting is the final but crucial step in flexible stone installation. While it may seem simple, this process directly affects the aesthetic finish, waterproofing, and long-term stability of the wall. Incorrect grouting can lead to staining, cracking, or even detachment over time.
Here are some key points to keep in mind when grouting flexible stone panels to ensure a clean, durable, and professional result.
Never rush into grouting.
Wait at least 48 hours after the panels are installed to allow the adhesive to dry and bond completely.
In humid or rainy environments, extend this period appropriately.
Grouting too early may trap moisture, weakening the adhesive and causing “bleeding” or “efflorescence” on the surface.
Before applying the grout, make sure the joint gaps are clean and free from dust, adhesive residue, or debris.
Any remaining material can prevent the grout from bonding properly, leading to uneven color or cracks later.
For indoor applications, it’s recommended to use masking tape to protect the edges of the flexible stone and prevent staining during the process.
For flexible stone panels, use a cement-based or polymer-modified tile grout — also known as flexible stone grout.
It’s typically made of inorganic silicate, polymers, and pigments, offering strong adhesion, color stability, and waterproof performance.
Common colors include: White, light gray, dark gray, and black.
(Custom colors can be produced upon request, though minimum order quantities apply.)
Mix the grout with clean water according to the manufacturer’s ratio until it forms a smooth paste.
Use a grout bag or scraper to fill the joints evenly.
After the grout starts to semi-dry (usually 40–60 minutes depending on temperature and humidity), use a grout tool to smooth the surface.
Avoid adding water again during the process — rehydration can cause color fading or “white streaks.”
Recommended consumption: about 1 kg per square meter.
Indoor Applications:
For interior walls, joints can be kept as thin as 1–2 mm (blade joint). In some cases, grouting can even be skipped for a more natural and seamless look. If grouting is necessary, select a color close to the flexible stone to maintain a uniform finish.
Outdoor Applications:
Exterior walls must always be grouted to prevent rainwater infiltration.
Small brick-style panels: leave 8–10 mm joints, often filled with dark gray or black grout for better depth and contrast.
Large panels (e.g., 600×1200 mm): leave 2–6 mm joints depending on visual preference.
The goal is to enhance the wall’s 3D appearance while improving durability.
After grouting, protect the wall from rain or direct moisture until the joints are fully dry.
Rain during the curing stage can cause “efflorescence” — visible white marks caused by cement salts.
Depending on the weather and wall material, the drying process typically takes:
40–60 minutes on cement walls at 25–35°C
1–2 hours on cooler or non-porous surfaces such as wood or steel panels
From practical experience, color selection matters.
For example, one exterior project that originally used same-color grout was later redone in white grout, which made the surface look much cleaner and more structured.
For most outdoor walls, white or black grout tends to give the best long-term appearance and resistance to weathering.
Grouting flexible stone panels is more than just filling gaps — it’s about achieving durability, waterproofing, and aesthetic harmony.
By allowing proper curing, cleaning joints carefully, and selecting the right grout material and color, you can ensure that every project looks beautiful and performs well for years to come.
For professional installation advice or flexible stone solutions, contact WIFi Ceramics: sales@wificeramics.com
