| DESCRIPTION | STANDARD TEST | MEASUREMENT UNIT | ISO STANDARD REQUIREMENT |  |
| Length & Width | ISO 10545 - 2 | mm | ±0.6% Max | ±0.6% Max |
| Thickness | ISO 10545 - 2 | mm | ±5.0% Max | ±5.0% Max |
| Sides Straightness | ISO 10545 - 2 | mm | ±0.3% Max | ±0.3% Max |
| Rectangularity | ISO 10545 - 2 | mm | ±0.3% Max | ±0.3% Max |
| Surface Flatness | ISO 10545 - 2 | mm | ±0.4% Max | ±0.4% Max |
| Water Absorption | ISO 10545 - 3 | Mass | ≤0.5% | ≤0.27% |
| Breaking Strength | ISO 10545 - 4 | N/mm² | ≥1300 | ≥1300 |
| Modular of Rupture | ISO 10545 - 4 | N/mm² | ≥35N/mm2 | 47.5N/mm2 |
| Abrasion Resistance | ISO 10545 - 7 | Visual Check | Class 3 Min | Class 3 Min |
| Thermal Shock Resistance | ISO 10545 - 9 | Visual Check | Pass | Fully Resistance |
| Crazing Resistance | ISO 10545 - 11 | Visual Check | Pass | Fully Resistance |
| Frost Resistance | ISO 10545 - 12 | Visual Check | Pass | Fully Resistance |
| Resistance to Chemicals | ISO 10545 - 13 | Visual Check | Class B Min | Class A |
| Resistance to Staining | ISO 10545 - 14 | Visual Check | Class 3 Min | Class 5 |
| Slipperiness | DIN 51130:2014 | Visual Check | Declared Value | R11 |
| Each different tiles series is produced to meet different performance requirements. For specific product technical performance, please request from  sales team or their agent or distributor. | ||||
| Colour Variations: Since the colour reproduction in this piece will vary from the actual tile colours, final selection should be made from tile samples. Colour, shade, and glazed variations may exist due to the inherent characteristics of porcelain tile. | ||||
| DESCRIPTION | STANDARD TEST | MEASUREMENT UNIT | ISO STANDARD REQUIREMENT | |
| Length & Width | ISO 10545 - 2 | mm | ±0.5% Max | ±0.5% Max |
| Thickness | ISO 10545 - 2 | mm | ±5.0% Max | ±5.0% Max |
| Sides Straightness | ISO 10545 - 2 | mm | ±0.5% Max | ±0.5% Max |
| Rectangularity | ISO 10545 - 2 | mm | ±0.6% Max | ±0.6% Max |
| Flatness: a)Centre Curvature b)Edge Curvature c)Warpage | ISO 10545 - 2 ISO 10545 - 2 ISO 10545 - 2 | mm mm mm | ±0.5% Max ±0.5% Max ±0.5% Max | ±0.5% Max ±0.5% Max ±0.5% Max |
| Surface Quality | ISO 10545 - 2 | One major area of tiles | ≥95% free from visible defect | ≥95% free from visible defect |
| Water Absorption | ISO 10545 - 3 | Mass | ≤0.5% | ≤0.5% |
| Modulus of Rupture | ISO 10545 - 4 | N/mm² | ≥35N/mm² | ≥35N/mm² |
| Deep Abrasion | ISO 10545 - 6 | mm3 | ≤175mm3 | ≤175mm3 |
| Surface Abrasion PEI ASRM C1027 | ISO 10545 - 7 | Visual Check | Manuf.to state Abrasion Class, Cycle Passed | Manuf.to state Abrasion Class, Cycle Passed |
| Crazing Test | ISO 10545 - 11 | Visual Check | Not Applicable for porcelain tiles | Not Applicable for porcelain tiles |
| Frost Resistance | ISO 10545 - 12 | Visual Check | Required | Required |
| Chemical Resistance(Low Cons.) | ISO 10545 - 13 | Visual Check | Manuf.to state | Manuf.to state |
| Chemical Resistance (Household/Swimming Pool) | ISO 10545 - 13 | Visual Check | Max Visible Change On Cut Side | Max Visible Change On Cut Side |
| Stain Resistance | ISO 10545 - 14 | Visual Check | Class 3 Min | Class 3 Min |
| Coefficient of Friction | ISO 10545 - 17 | Manuf.to state | Manuf. to state | Manuf. to state |
| Each different tiles series is produced to meet different performance requirements. For specific product technical performance, please request from sales team or their agent or distributor. | ||||
| Colour Variations: Since the colour reproduction in this piece will vary from the actual tile colours, final selection should be made from tile samples. Colour, shade, and glazed variations may exist due to the inherent characteristics of porcelain tile. | ||||
| DESCRIPTION | STANDARD TEST | MEASUREMENT UNIT | ISO STANDARD REQUIREMENT | |
| Length | EN ISO 10545 - 2 | mm | ±0.6% | ±0.5% Max |
| Width | EN ISO 10545 - 2 | mm | ±0.6% | ±0.5% Max |
| Thickness | EN ISO 10545 - 2 | mm | ±5% | 10.2mm ±3% |
| Straightness of Side | EN ISO 10545 - 2 | mm | ±0.5% | ±0.4% Max |
| Rectangularity | EN ISO 10545 - 2 | mm | ±0.5% | ±0.4% |
| Surface Flatness: Centre Curvature | EN ISO 10545 - 2 | mm | ±0.5% | ±0.4% |
| Surface Flatness: Edge Curvature | EN ISO 10545 - 2 | mm | ±0.5% | ±0.4% |
| Surface Flatness: Warpage | EN ISO 10545 - 2 | mm | ±0.5% | ±0.4% |
| Surface Quality | EN ISO 10545 - 2 | One major area of tiles | Minimum 95% | Minimum 97% |
| Water Absorption | EN ISO 10545 - 3 | Mass | 3%<E ≤6% | 3%<E ≤6% |
| Breaking Strength | EN ISO 10545 - 4 | N/mm² | ≥800 | 1580 |
| Modulus of Rupture | EN ISO 10545 - 4 | mm3 | Minimum 18 | 26 |
| Abrasion Resistence | EN ISO 10545 - 7 | / | / | Class 3 |
| Thermal Shock Resistance | EN ISO 10545 - 9 | / | Pass | Pass |
| Chemical Properties: Resistance to Stain | EN ISO 10545 - 14 | / | Minimum Class 3 | Minimum Class 3 |
| Resistance to Chemicals | EN ISO 10545 - 13 | / | Minimum Class B | Minimum Class B |
| Each different tiles series is produced to meet different performance requirements. For specific product technical performance, please request from sales team or their agent or distributor. | ||||
| Colour Variations: Since the colour reproduction in this piece will vary from the actual tile colours, final selection should be made from tile samples. Colour, shade, and glazed variations may exist due to the inherent characteristics of porcelain tile. | ||||
